When it comes to your current fuel gas conditioning, do you constantly deal with manpower issues or downtime due to rich gas? How about the loss of revenue due to poor engine performance or premature engine overhauls?
Fuel gas conditioning is essential to a successful oil and gas company. These are problems your team shouldn’t have to deal with regularly.
If these are problems you know all too well, don’t let them destroy your bottom line; take advantage of the solution:
The Pro-Gas Fuel Gas Conditioner Skid.
What is Fuel Gas Conditioning?
Gas conditioning is the process of treating natural gas to remove impurities like water vapor, carbon dioxide, and hydrogen sulfide.
Once the impurities are removed from the raw fuel, the gas is then compressed and transported through pipelines to end users.
Gas conditioning is important because it helps extend pipelines’ life and prevent corrosion. It also helps to improve the efficiency of gas-fired power plants and ensure that the gas meets environmental standards.
In addition, gas conditioning can help to reduce the cost of gas production by making it possible to reuse treated gas rather than venting it or flaring it off. As a result, gas conditioning plays an important role in the oil and gas industry.
Why Does Fuel Require Conditioning?
Fuel conditioning is the process of treating fuel to remove impurities and improve its quality. While most people believe mined fuel is ready for distribution, nothing is far from the truth.
Fuel conditioning is essential for ensuring that engines run smoothly and efficiently. Without conditioning, fuel can clog up engine parts and lead to expensive repairs.
Moreover, unclean fuel can cause environmental damage when it is burned. As a result, fuel conditioning is a crucial step in oil and gas production.
Fuel conditioning is also important for safety reasons; Unclean gas can be dangerous when it is used in cars or other vehicles. Improperly conditioned gas can cause explosions or fires.
As an oil and gas production company, you must take care to condition your products before they are sold to consumers.
What is a Fuel Conditioning Skid?
A gas conditioning skid is a gas treatment system that is used in the oil and gas industry. The gas conditioning skid removes water and contaminants from the gas, leaving the gas clean and dry.
Our skids can be used to treat:
-
- Natural gas
- Propane
- Butane and other gases
The gas conditioning skid is an important piece of equipment within your facility because it helps to protect the equipment from corrosion and wear. Let our JT skids help improve your facility’s efficiency by accurately removing water and contaminants from the gas based on your specific products.
How A Pro-Gas Fuel Gas Conditioning Skid Works
A conventional fuel gas conditioning system takes raw, high-pressure gas through a JT valve to provide lean fuel gas to maximize natural gas liquids vapor recovery. Using gas-to-gas and gas-to-liquids exchangers, our high-efficiency fuel-conditioning skid helps you achieve lower temperatures than conventional Joules Thompson skid units.
Pro-Gas LLC has spent years engineering and designing our high-performance skid-mounted JT plants. Our industry-proven low-temperature fuel gas conditioning skid works to help you treat your fuel gas more efficiently.
Here’s How Our Fuel Gas Conditioning Skids Can Help You:
-
-
- Maximize NGL recoveries by achieving temperatures as low as -50 degrees Fahrenheit.
- Provide lower BTU fuel for wellhead and field operations.
- Increase horsepower and decrease maintenance due to lowering the BTU.
-
Our fuel gas conditioning system also works as a supply and demand skid. This means the process amount of fuel gas will be dictated by the demand only. This also works to help you maximize revenue.
More Benefits Of Pro-Gas Services Jt Skids:
-
-
- Skid mounted for easily mobilization and installation
- Compact equipment layout-on single skid
- 1,440 psig MAOP
- Supply to demand all pneumatic control system
- High-efficiency heat exchangers
- Operationally friendly
-
Not Your Ordinary Fuel Gas Conditioning Skid
Don’t think of our JT skid design as just any other fuel conditioner. Our Pro-Gas design also includes Hydrocarbon dew point conditioning, NGL extraction, and Flare reduction
Improve Your Facility With Pro-Gas Fuel Conditioner Skid
If you’re ready to learn how the Pro-Gas Fuel Gas Conditioning Skid can make your gas stream more profitable, contact us today.
In addition to our standard, Pro-Gas LLC skids are available in 500, 1,500, 3,000 MCFD capacities. If you need greater capacities, no problem. Just let us know.
